济南工作服定制之前应了解好这些问题_新闻资讯-济南亚美森服饰有限公司

新闻

联系方式

服务热线：0531-85980985　

联系人：宁经理
手机：13953116782
电话：15990999232
邮箱：499589624@qq.com
地址：济南市槐荫区清河北路11号（美里新居南门斜对面）亚德森工厂店

济南工作服定制之前应了解好这些问题

来源：http://www.ymsfs.com 日期：2022-05-23 发布人：

1.工作服定制线

1. Customized work clothes line

线头干净，一般的工作服。它们有尾巴，有专门的人剪断线头。一般来说，便宜的工作服一般不会。还有一件工作服，如果对质量有要求，线长一般不超过1CM。

The thread end is clean, which is a common brand of work clothes. They have tails and special people cut thread ends. Generally speaking, cheap work clothes will not. There is also a work suit. If there are quality requirements, the line length is generally no more than 1cm.

2、工作服的做工

2. Workmanship of work clothes

看线。主要看工作服的车线是否笔直？是对称的吗？针迹长度是细还是密？一般来说，更好有一个密集的针距。没有对齐。背针：一件工作服开始的时候，一般要来回缝几针，这样工作服就不容易打开。都是为了防止他一拉就吹嘴。一般梭织的比较明显，比如梭织的裙子，你可以看看他在接口处多缝几针，看看侧缝，看看工装裤。看一些有偏见的地方，普通人不注意看到的地方，“领子”、“袖子、袖口、腋窝等”。

Look at the line. Mainly depends on whether the line of work clothes is straight? Is it symmetrical? Is the stitch length thin or dense? Generally speaking, it is best to have a dense needle pitch. No alignment. Back stitch: at the beginning of a work suit, it is generally necessary to sew several stitches back and forth, so that the work suit is not easy to open. To prevent him from blowing his mouth as soon as he pulls it. Generally, the woven is obvious. For example, for a woven skirt, you can see how many stitches he sews at the joint, the side seam and the overalls. Look at some biased places, where ordinary people don't pay attention, "collar", "sleeve, cuff, armpit, etc.".

3.定制版型工作服

3. Customized work clothes

盘形不对称，切片不整齐。

The disc shape is asymmetric and the slices are irregular.

4、工作服的线条是否整齐？

4. Are the lines of work clothes neat?

这条线的松紧度在不同的部位有不同的要求，比如肩膀，人体经常活动的部位，稍微松一点就好，在工作服下面，稍微紧一点就好，一般是工作服都是统一的领口。,领口缝线,腋下缝线,接口处是否有回线。

The tightness of this line has different requirements in different parts, such as the shoulder, the part where the human body often moves, just loosen a little, and under the work clothes, just tighten a little. Generally, the work clothes have a unified neckline., Whether there is return line at the neckline suture, underarm suture and interface.

济南工作服

5.工作服的熨烫

5. Ironing of work clothes

这里注意一下，如果是热钻工作服，看钻头是否容易脱落，如果是高温压力钻，就不会脱落！热钻是否容易脱落。但是，一般的工作服不会使用热钻。

Note here that if it's a hot drilling suit, check whether the drill bit is easy to fall off. If it's a high-temperature pressure drill, it won't fall off! Whether the hot drill is easy to fall off. However, ordinary work clothes do not use hot drills.

6、工作服定制规格

6. Customized specifications of work clothes

济南工作服厂家人员来说一下规格，也就是众所周知，工作服的尺码一定要对，不是M，现实中是L，可能会出现乱码或者错码。

Let's talk about the specifications of Jinan overalls manufacturers. As we all know, the size of overalls must be right, not m, but l in reality. There may be random or wrong codes.

7、工作服定制标准化包装

7. Customized standardized packaging of work clothes

看一件工作服时，先平放，看看会不会有色差，除了，上下工服是否均匀，然后检查是否有小孔。

When looking at a work suit, first lay it flat to see if there will be color difference. In addition to timing, check whether the upper and lower work clothes are uniform, and then check whether there are small holes.

更多问题信息的了解就来关注我们的网站www.ymsfs.com，本企业制作定做工作服等服饰多年，资源有保障。

For more information, please visit our website at www.ymsfs.com COM, our company has specialized in making customized work clothes and other clothes for many years, and the resources are guaranteed.

上一条：工装定做的生产交货期问题的分析 | 下一条：皮革面料的服装清洗保养要注意方法

搜索

济南工作服定制之前应了解好这些问题

来源：http://www.ymsfs.com 日期：2022-05-23 发布人：

资讯MORE+