工作服裁剪工艺要求？_新闻资讯-济南亚美森服饰有限公司

新闻

联系方式

服务热线：0531-85980985　

联系人：宁经理
手机：13953116782
电话：15990999232
邮箱：499589624@qq.com
地址：济南市槐荫区清河北路11号（美里新居南门斜对面）亚德森工厂店

工作服裁剪工艺要求？

来源：http://www.ymsfs.com 日期：2021-05-26 发布人：

裁剪前要先根据样板绘制出排料图，“完备、合理、节省”是排料的基源头根本则。在裁剪工序中紧张工艺要求如下：

Before cutting, it is necessary to draw the layout map according to the template, and "complete, reasonable and economical" is the basic principle of layout. In the cutting process, the process requirements are as follows:

（1）拖料时点清数量，过细避开疵点。

(1) When dragging materials, check the quantity and avoid defects.

（2）对付差异批染色或砂洗的面料要分批裁剪，警备同件梳妆上出现色差征象。对付一开端猜中存在色差征象的要举行色差排料。

(2) To deal with the fabric dyed or sand washed in different batches, it is necessary to cut it in batches to guard against the appearance of color difference on the same dressing. To solve the problem of color difference in the beginning, we should arrange the color difference.

（3）排料时过细面料的丝绺顺直以及衣片的丝缕偏向是否切合工艺要求，对付起绒面料（比方丝绒、天鹅绒、灯芯绒等）不行倒顺排料，否则会影响梳妆颜色的深浅。

(3) When arranging, whether the grain of too fine fabric is straight and whether the thread deviation of the garment piece meets the process requirements, it is not allowed to arrange the material in reverse order for velvet fabrics (such as velvet, velvet, corduroy, etc.), otherwise it will affect the depth of the dressing color.
济南工作服定做

（4）对付条格纹的面料，拖料时要过细各层中条格对准并定位，以包管梳妆上条格的连贯和对称。

(4) For the fabric with stripe pattern, it should be too thin when dragging, and the stripe in each layer should be aligned and positioned to ensure the continuity and symmetry of the stripe on the dressing.

（5）裁剪要求下刀准确，线条顺直流畅。铺型不得过厚，面料上下层不偏刀。

(5) Cutting requires accurate cutting and smooth lines. The laying type shall not be too thick, and the upper and lower layers of the fabric shall not be skewed.

（6）根据样板对位暗号剪切刀口。

(6) Cut the knife edge according to the template alignment code.

（7）接纳锥孔标志时应过细不要影响成衣的表面。裁剪后要举行清点数量和验片事情，并根据梳妆规格分堆系缚，附上票签注明款号、部位、规格等。

(7) The taper mark should be too thin to affect the surface of the garment. After cutting, count the quantity and check the film, and tie them according to the dressing specifications, and attach the ticket to indicate the model number, position, specification, etc.

上面就是小编给大家讲解的内容了，相信大家都有所了解了吧！希望大家在订购工作服同时，能够参考以上的内容选择哦！！！如想了解更多精彩资讯欢迎点击我们的官网：济南工作服定做https://www.ymsfs.com。

The above is the content of Xiaobian's explanation to you. I believe you all know it! I hope you can refer to the above content when ordering work clothes!!! If you want to know more wonderful information, please click our official website: Jinan work clothes customized https://www.ymsfs.com .

上一条：济南职业装浅谈职业女性着装四讲究！ | 下一条：大学生如何选择一套西装？

搜索

工作服裁剪工艺要求？

来源：http://www.ymsfs.com 日期：2021-05-26 发布人：

资讯MORE+